發新話題 Report thanks

連唔到Router

回復 #7 Vanbachichi 的帖子

金鑰應該set到架 !!! 點解 ??? 系唔系個router有問題啊 ???


輕輕的我走了,正如我輕輕的來;我輕輕的招手, 作別西天的雲彩.
悄悄的我走了,正如我悄悄的來;我揮一揮衣袖,不帶走一片雲彩.

TOP

Sorry for mis-lead you. 我指係個router度唔set WEP,之後個adapter connect 時唔使入金鑰,咁樣都connect 唔到.係咪牌子唔夾會有啲咁嘅問題?

TOP

回復 #9 Vanbachichi 的帖子

甘就真系有機會系唔相容及會唔會個Router有問題啊 !!!


輕輕的我走了,正如我輕輕的來;我輕輕的招手, 作別西天的雲彩.
悄悄的我走了,正如我悄悄的來;我揮一揮衣袖,不帶走一片雲彩.

TOP

引用:
原帖由 Vanbachichi 於 2007-10-22 16:24 發表 連唔到Router圖片1
Sorry for mis-lead you. 我指係個router度唔set WEP,之後個adapter connect 時唔使入金鑰,咁樣都connect 唔到.係咪牌子唔夾會有啲咁嘅問題?
正常來講係唔會唔相容
會唔會你個ipduplicated
同埋個router 係有得set 以下lee2個
以下係我個rounter 既setting
引用:
Wireless Router Settings

Enable Wireless Router Radio

The Wireless Access PointRouter of this router can be enabled or disabled to allow wireless access. The wireless icon on the front of the router will also display the current status of the Wireless Access Point to let you know if it is disabled or enabled. If Enabled, wireless stations will be able to access the Internet. If Disabled, wireless stations will not be able to access the Internet.

Enable SSID Broadcast

If Enabled, the Wireless RouterSSID will broadcast its name (SSID) to all Wireless Stations. Stations which have no SSID (or a "null" value) can then adopt the correct SSID for connections to this Access Point.

Wireless Card Access List

By default, any wireless PC that is configured with the correct SSID will be allowed access to your wireless network. For increased security, you can restrict access to the wireless network to only allow specific PCs based on their MAC addresses. From the Wireless Settings menu, click the Setup Access List button to display the Wireless Access List menu.

TOP

Thanks. 我朋友用的router 是 Buffalo WBR2-G54,應該apply左以上setting,因為其中一部PC可以上,另一部唔得...

TOP

引用:
原帖由 Vanbachichi 於 2007-10-22 22:25 發表 連唔到Router圖片2
Thanks. 我朋友用的router 是 Buffalo WBR2-G54,應該apply左以上setting,因為其中一部PC可以上,另一部唔得...
會唔會新過一個有問題啊?
新既應該可以連到舊既

TOP

did u manuel key in the 金鑰?
if u set security, u need to key in 64 or 128bit 金鑰

TOP

thanks